名称

全自动单头沾锡穿胶壳机HRG-2805-JK2

功能Function

电线裁线、剥皮，一端剥皮搓线沾锡，另一端剥皮、打端子穿胶壳

Wire cutting,stripping,one end stripping, twisting and tinning,the other end stripping,crimping terminal and housing inserting

电源Power

AC220V/110V  50/60HZ(单相/Single phase)

加工线径Wire process range

AWG18-AWG32

适合胶壳尺寸Applicable plastic shell

W16*D20*H20mm以下（端子间距1.25-3.96）

切断长度Cutting length

25mm-450mm

剥皮长度Stripping length

1.0-5.0mm

沾锡长度Tinning length

1.0mm-5mm

切断精度Cutting accuracy

0.2mm士0.002*L（L=切断长度/Cutting length）

压着能力Crimping ability

标准2吨（可订3吨）Standard 2T (3 T can be customized)

生产率Speed

2200孔/时    2200 holes/h

气压Air pressure

0.5-0.7Mpa(需使用清洁干燥气体)(use clean and dry air)

外型尺寸Dimension

L2100*W1200*H1580mm

重量Weight

约1200kg

检测装置Detector

线材缺线或打结、压着不良、端子穿入塑壳是否到位、气压检测、剥皮异常、胶壳有无、助焊剂有无、良率设定

Wire exists or not,wire tie knot or not,terminal through plastic shell or not,pressure test,abnormal stripping,plastic exists or not,flux exists or not,yield set.

名称

全自动单头穿胶壳机（多线）LSN-2805-JK8

Full Automatic single head housing inserting machine

功能Function

单头打端子、单头穿塑壳，同时可选用八色以内线材，长短可任意设定，可打单排10孔、最多3排

Single head crimping terminal.Single head housing inserting,at the same time can choose 8 colors within the wire, length can be set arbitrarily, can play a single row of 10 holes, up to 3 rows.

电源 Power supply

AC220V/110V 50/60HZ  (单相/single phase)

加工线径 Wire process range

AWG18-AWG32(可定制最多8种颜色电线同时操作)

(Can be customized up to 8 color wire operation at the same time)

适合胶壳尺寸Applicable plastic shell

MAX40*25*25   MIN 5*6*3

切断长度Cutting length

60mm-500mm(切线越长，速度越慢) (500mm以上长度可定制)

(The longer the cutting length, the slower the velocity)

剥皮长度Stripping length

前段1mm-10mm 后端1-6mm    Head 1-10MM   Tail 1-6mm

沾锡长度Tinning length

0.2mm-10mm

切断精度Cutting accuracy

0.2mm士0.002*L （L=切断长度/Cutting length）

压着能力Crimping ability

标准2吨（可订3吨）Standard 2T (3 T can be customized)

生产率Speed

2200孔/时

气压Air pressure

0.5-0.7Mpa(需使用清洁干燥气体)(use clean and dry air)

外型尺寸Dimension

L2100*W1200*H1580mm

重量Weight

约1200kg  /About 1200kg

检测装置Detector

线材缺线或打结、压着不良、端子穿入塑壳是否到位、气压检测、剥皮异常、胶壳有无、助焊剂有无、良率设定.

Wire exists or not,wire tie knot or not,terminal through plastic shell or not,pressure test,abnormal stripping,plastic exists or not,flux exists or not,yield set.