|
|
|
| 全自动高速双头排线端子压着机HRG-2819 |
一、特点Features 和国内同类设备比，技术含量高、性价比最高、速度最快、稳定性好、使用成本低、操作和维修简便。 适用范围广：主要是用于压着：JC,PH、XH、EH、ZH等端子，2468/2651规格的红白排、蓝白排、灰排等排线。 Compared withdomestic similar equipment, it has high technology content, the highest costperformance ratio, the fastest speed, good stability, low use cost, easyoperation and maintenance. Mainly used for pressing: JC, PH,XH, EH, ZH and other terminals, 2486/2651 specifications red and white row,blue and white row, gray row and other flat flexible cable. |
| 咨询热线：0512-5711 5729 |
|
| 产品详情 |
一、特点Features 和国内同类设备比，技术含量高、性价比最高、速度最快、稳定性好、使用成本低、操作和维修简便。 适用范围广：主要是用于压着：JC,PH、XH、EH、ZH等端子，2468/2651规格的红白排、蓝白排、灰排等排线。 Compared withdomestic similar equipment, it has high technology content, the highest costperformance ratio, the fastest speed, good stability, low use cost, easyoperation and maintenance.
 
二、参数Parameter
功能
Function | 排线裁线剥皮两头打打端，单头打，双头打，间隔打，正反打
Flat flexible cable cutting,stripping,double ends crimping,single end crimping,spacing crimping and positive and negative crimping | 外形尺寸
Dimension | 1.65mX0.75mX1.5m | 重 量
Weight | 300kg | 工作气压
Aire pressure | 0.4Mpa-0.6Mpa(需使用清干燥气体)
(use clean and dry air) | 工作电压
Power supply | AC220V/110V 50/60HZ(单相/Single phase)
| 功率
Power | 500W | 切断长度
Cutting length | >85mm | 剥皮长度
Stripping length | 2mm-10mm | 线材端子种类
Type of wire and terminal | JC,PH、XH、EH、ZH等端子，2468、2651
如灰白排/蓝白排/红白排/彩排等
JC, PH, XH, EH, ZH and other terminals, 2486/2651 specifications red and white row, blue and white row, gray row and other cable. | 较大线宽
Max cable width | 35mm | 单根线径
Single wire OD | 0.8mm-3.0mm | 打端子效率
Speed | 23000PCS/H(排线10P,100mm2468线时) | 端子压接精度
Crimping accuracy | 无视觉定位≤±0.15mm，有视觉定位≤±0.05mm（可选）
No visual positioning≤±015mm
visual positioning≤±0.05mm | 检测装置
Detector
| 端子压接不良、端子有无、送料故障、机器异常 、气压检测
Terminal crimping bad,terminal exists,feeding fault,abnormal machine,pressure detection |
|
|
